Titanium oxide nanopowder, APS 10-30 nm, ≥99.… 13463-67-7

Name: Titanium oxide nanopowder, APS 10-30 nm, ≥99.7% trace metals basis
Brand: Vaqora Chemicals
SKU: VQ-017527

About Titanium oxide nanopowder, APS 10-30 nm, ≥99.7% trace metals basis

Vaqora Chemicals supplies Titanium oxide nanopowder, APS 10-30 nm, an oxide nanoparticle registered under CAS number 13463-67-7, specified at ≥99.7% purity. Formula O2Ti, molecular weight 79.87 g/mol. Systematically, it is named dioxotitanium. Alternative names: Titanium(IV) oxide Nanoparticles and Titanium(IV) oxide.

It is supplied as a white powder. Store in a tightly closed container in a cool, dry and well-ventilated place. Under GHS it is labelled “Warning”, so handle it with suitable PPE and consult the SDS.

Key uses span nanocomposites, catalyst supports, coatings and ceramics and catalysis. Typical end-use sectors are academic and industrial research and paints and coatings.

Vaqora Chemicals supplies Titanium oxide nanopowder, APS 10-30 nm in 10 g, 25 g, 100 g and 500 g packs, each shipped with a Certificate of Analysis (COA), and exports worldwide.

Typical applications

Nanocomposites
Catalyst supports
Coatings & ceramics
Catalysis

Industries

Specifications & identifiers

Chemical identifiers
Product name	Titanium oxide nanopowder, APS 10-30 nm, ≥99.7% trace metals basis
Catalogue No.	VQ-017527
CAS Number	13463-67-7
IUPAC name	dioxotitanium
Molecular formula	O₂Ti
Molecular weight	79.87 g/mol
Exact mass	79.9378
Purity / assay	≥99.7%
HSN code	28230010
InChIKey	GWEVSGVZZGPLCZ-UHFFFAOYSA-N
SMILES	O=[Ti]=O
PubChem CID	26042

Physical properties
Physical form	Powder
Appearance	White powder
H-bond donors / acceptors	0 / 2
TPSA	34.1 Å²
Synonyms	Titanium(IV) oxide Nanoparticles, Titanium(IV) oxide, Titanium White, Tiofine, Tioxide, Bayertitan A, Titanic anhydride, Tioxide RHD, Tioxide RSM, Zopaque LDC, Rutiox CR, Titanox RANC

Safety & hazard information (GHS)

Health hazard

Signal word: Warning

Hazard statements

H351Suspected of causing cancer

Precautionary statements: P203, P280, P318, P405, P501

Classification is indicative (aggregated GHS notifications) and may vary by grade and concentration. Always refer to the SDS supplied with your lot.

Documents

Safety Data Sheet (SDS)16-section GHS · on request Certificate of AnalysisTypical / batch COA · on request Specification sheetTDS / MOA · on request

Other grades of CAS 13463-67-7

Titanium dioxide granules, 1-5 mm, 99.99%

CAS: 13463-67-7
Formula: O₂Ti
MW: 79.87 g/mol

VQ-017258

Titanium dioxide pieces, 1-3 mm, 99.99%

CAS: 13463-67-7
Formula: O₂Ti
MW: 79.87 g/mol

VQ-017259

Titanium dioxide sputtering target, dia x thickness 3 inch x 3 mm, 99.99%

CAS: 13463-67-7
Formula: O₂Ti
MW: 79.87 g/mol

VQ-017260

Titanium dioxide sputtering target, dia x thickness 3 inch x 5 mm, 99.99%

CAS: 13463-67-7
Formula: O₂Ti
MW: 79.87 g/mol

VQ-017261

Titanium dioxide, 99.9%

CAS: 13463-67-7
Formula: O₂Ti
MW: 79.87 g/mol

VQ-018432

Puriss

Titanium dioxide, 99.99%

CAS: 13463-67-7
Formula: O₂Ti
MW: 79.87 g/mol

VQ-018433

Synthesis

Titanium dioxide, 99%

CAS: 13463-67-7
Formula: O₂Ti
MW: 79.87 g/mol

VQ-015000

Titanium dioxide, anatase powder, 99.8%

CAS: 13463-67-7
Formula: O₂Ti
MW: 79.87 g/mol

VQ-018434

All 18 products with CAS 13463-67-7 →

Frequently asked questions

What is the CAS number of Titanium oxide nanopowder, APS 10-30 nm, ≥99.7% trace metals basis?

The CAS Registry Number of Titanium oxide nanopowder, APS 10-30 nm, ≥99.7% trace metals basis is 13463-67-7. It is also known as Titanium(IV) oxide Nanoparticles, Titanium(IV) oxide, Titanium White.

What is the molecular formula and molecular weight of Titanium oxide nanopowder, APS 10-30 nm, ≥99.7% trace metals basis?

Titanium oxide nanopowder, APS 10-30 nm, ≥99.7% trace metals basis has the molecular formula O2Ti and a molecular weight of 79.87 g/mol. Its IUPAC name is dioxotitanium.

Which grade and pack sizes of Titanium oxide nanopowder, APS 10-30 nm, ≥99.7% trace metals basis can I order?

We supply Titanium oxide nanopowder, APS 10-30 nm, ≥99.7% trace metals basis in (≥99.7%) grade, in 10 g, 25 g, 100 g, 500 g, 5 x 1 kg, 4 x 25 kg packs. Larger bulk quantities and custom packing are quoted on request.

Do you provide a COA and SDS with Titanium oxide nanopowder, APS 10-30 nm, ≥99.7% trace metals basis?

Yes. Every lot of Titanium oxide nanopowder, APS 10-30 nm, ≥99.7% trace metals basis is shipped with a batch-specific Certificate of Analysis, and a 16-section GHS Safety Data Sheet is provided with the quotation and the shipment.

Can Titanium oxide nanopowder, APS 10-30 nm, ≥99.7% trace metals basis be shipped internationally?

Yes. Titanium oxide nanopowder, APS 10-30 nm, ≥99.7% trace metals basis is classified as hazardous, so it is packed in UN-approved packaging and shipped as dangerous goods under IATA/IMDG rules. We export worldwide on EXW, FOB, CIF and DAP terms.